HP C7000 AC redundant mode question

Hi

We currently have several C7000 enclosures which are configured as below for power redundancy, 

All are set to AC redundant, with dynamic power enabled.

PSUs 1,3,5 are on AC feed A.

PSUs 2,4,6 are on AC feed B

Tthe documentation I've reviewed states this should be 1,2,3 on feed A and 4,5,6 on feed B.

Is our current setup fully redundant, or do we need to change from 1,3,5 -> A 2,4,6 ->B to 1,2,3 -> A 4,5,6 -> B?

Thank you