I had a power outage and after power was restored, one of our FC module stopped working, I thought I needed to get a replacement so I did and after inserting that replacement It sill did not work. I tried to update the firmware but noticed that I could not connect to the module noted below because the In-Band IPv4 Address was set to all zero's. Even after I apply the correct IP and have done resets, power off/on even remove, reinseart.
My next steps is to try and remove all blades and factory reset my entire C7000 blade chassie. I cannot upgrade my firmware for everything as we have old HP BL460G7 blades and they do not support any of the newer firmware also all my blades are host to VMware ESXi 6.0. This is a production environment and I could use anyones guidance. thank you. Below is basic hardware info. if more is needed please let me know.
OA-MOD1-BLENCA> show interconnect info 3
3. Fibre Channel
Product Name: HP 4Gb VC-FC Module
Width: Single
URL to Management interface:
In-Band IPv4 Address: 0.0.0.0
User Assigned Name:
Part Number: 409513-B21
Spare Part Number: 410152-001
Serial Number: MXK828001M
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Absent
Internal Serial Route to OA: Enabled
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
OA-MOD1-BLENCA> show ebipa interconnect
EBIPA Device Interconnect Settings
Bay Enabled EBIPA/Current Netmask Gateway DNS NTP Domain
--- ------- --------------- --------------- --------------- --------------- --------------- ------
1 Yes 10.5.64.4 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.4 10.15.64.11
2 Yes 10.5.64.5 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.5 10.15.64.11
3 Yes 10.5.64.6 255.255.252.0
0.0.0.0
4 Yes 10.5.64.7 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.7 10.15.64.11
5 Yes 10.5.64.8 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.8 10.15.64.11
6 Yes 10.5.64.9 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.9 10.15.64.11
7 Yes 10.5.64.10 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.10 10.15.64.11
8 Yes 10.5.64.11 255.255.252.0 10.5.64.1 10.15.64.10 10.15.64.10 admin.tusd.local
10.5.64.11 10.15.64.11
Onboard Administrator Firmware Information
Bay Model Firmware Version
--- -------------------------------------------------- ----------------
1 BladeSystem c7000 Onboard Administrator 4.60
2 BladeSystem c7000 Onboard Administrator 4.60
Interconnect Firmware Information
Bay Device Model Firmware Version
--- --------------------------- ----------------
1 HP 1/10Gb-F VC-Enet Module 3.51
2 HP 1/10Gb-F VC-Enet Module 3.51
3 HP 4Gb VC-FC Module [Not Available]
4 HP 4Gb VC-FC Module 1.43
5 HP 1/10Gb VC-Enet Module 3.51
6 HP 1/10Gb VC-Enet Module 3.51
7 HP 1/10Gb VC-Enet Module 3.51
8 HP 1/10Gb VC-Enet Module 3.51