Hi Allen,
Good day!
From the shared details I suspect like you might have not installed the VC FC module with the same version which is installed in the corresponding VC FC Module.Do you see amy incompatible firmware error in the VCM?
You can proceed towards upgrading the firmwares on the entire enclosure including servers as BL 460cG7.
Below Is the HPE ProLiant Server Blades - Compatibility with HPE BladeSystem c7000 and c3000 Enclosures and Firmware guide for your refernce.
Reference Guide : https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=mmr_sf-EN_US000050596
Are you really planning to reset the Enclosure to factory default?
Please Note: This is going to wipe off all the configuration and settings. Make sure you have the complete back up of the VCM and OA.
upgrading the firmware to the latest and then restoring the backup also will not work.
Suggestion : First take a complete back up and upgarde the firmware and check for the issues you have observed.
Cheers