Quantcast
Channel: All BladeSystem - General posts
Browsing all 1655 articles
Browse latest View live

Blade server upgradability C7000 m03323-B23

Hi all and thanks in advance for any help you can give.  I am not familiar with blade servers at all but have been researching them specifically the c7000 M03323-B23 because I have an opportunity to...

View Article


Re: Blade server upgradability C7000 m03323-B23

Hello,these Blades are already retired for 6 Years. What do you want to do with these servers?Can you tell us more about the Interconnect Modules of this C7000 Chassis? Without these modules you cannot...

View Article


Re: Blade server upgradability C7000 m03323-B23

This type of server is new to me. "interconnect modules"? Could you tellby looking at a picture? I will ask my contact tomorrow about this.Thank you very much for the heads up.

View Article

Image may be NSFW.
Clik here to view.

Re: Blade server upgradability C7000 m03323-B23

Hello,the interconnect Module are at the backside of the chassis. 2 at the top and 2 at the bottom. The two at the top are for Ethernet connections and for the two at the bottom you can decide...

View Article

Image may be NSFW.
Clik here to view.

Re: Blade server upgradability C7000 m03323-B23

back of c7000   

View Article


Re: Blade server upgradability C7000 m03323-B23

Hello,you have Cisco Catalyst 3020 Switches in Bay 1 + 2. Its an 1G Switch. All onboard network cards are connected to Bay 1 and 2. So you can use a Failover Teaming of the Nic Ports. You have only 2...

View Article

Re: c7000 chassis with 2 x FlexFabric 20/40 Interconnects and 2 x Brocade 16G...

Thx Thorsten. So how should i define the Fibre Channnel connectivity when creating server profiles? My FlexFabric 20/40 will handle all the Ethernet connections but i willalso need to define my FC...

View Article

Re: Setting Blade Server ILO passwords in c7000 Enclosure

Hi,i'm interessted by you scripts, i can't see it in your post ??thanks for help !

View Article


Re: Setting Blade Server ILO passwords in c7000 Enclosure

This post is several years old, not sure if the member who posted the example is still around. Below is example of the HPONCFG syntax and an example XML to change the Administrator password for a...

View Article


Re: Reset Blade Server iLo to defaults

hii was able to follow the instructions to connect to the server and run the reset command.can anyone help with detailed instructions to the run the RIBCL portion thanksMark

View Article

Server Specifications

What is the meaning of ch/co in a server specs ?

View Article

Firmware for Cisco Blade switch WS-CBS3020-HPQ

Dear friendsI am looking for the latest firmware with SSH feature support for the switch WS-CBS3020-HPQ, On Cisco website, it is available under the name "cbs30x0-ipbasek9-mz.150-2.SE10a.bin" but it...

View Article

BL460c Gen7 Health LED blinking red

Hi,I have a BL460c Gen7 server blade that has a red blinking light on the Health LED. It has 1 long blink and then 2 short blinks.Any suggestions on what to do?Thank You

View Article


Re: Server 2012 clt+alt+del logon screen blank after a few weeks

Here are good collection of proxy thanks https://www.howtoseeks.com/free-proxy-server-site/  

View Article

Re: Setting Blade Server ILO passwords in c7000 Enclosure

Hi,i'm interessted by you scripts, i can't see it in your post ??thanks for help !

View Article


Is port remapping possible on HP c7000?

I have c7000 BladeSystem platform and BL460c G8 servers with HP FlexFabric 10Gb 2-port 554FLB Adapter. I have no mezz-cards. Cisco Catalysts are in the Interconnect Bays 1 and 2, Virtual Connect Flex...

View Article

Image may be NSFW.
Clik here to view.

Re: Is port remapping possible on HP c7000?

The connections between the server LOM and mezzanine cards and the interconnect bays are hard wired.The C7000 User manual, the C7000 quickspec and other documents are showing you how. This is a full...

View Article


Re: Is port remapping possible on HP c7000?

hellodo you want to achieve this is correct configuration554FLB is correctly mapped to port 9 (depending on chassis slot) on each interconnect in bay 1 and 2JY

View Article

Re: Firmware for Cisco Blade switch WS-CBS3020-HPQ

If you go here:http://h20565.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8f09e0a0a1794e34a30b9d0fafYou can download the firmware version 15.02-SE9 file as an .EXE.  Extract the contents and you...

View Article

Re: Firmware for Cisco Blade switch WS-CBS3020-HPQ

Thank you for your reply, however, this is not the one I am looking for, I am looking for the crypto (encryption) firmware, on the same link you shared under release notes it is mentioned "The crypto...

View Article
Browsing all 1655 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>