Re: HPE c7000 BL enclosure OA issue
Does both OA shutdown?Does the replacement OA also behaves the same way?If yes, Try to reseat the OA sleave once,Or swap the OA to check if happens in only one OA slot.If the issue persists log a...
View ArticleRe: HPE c7000 BL enclosure OA issue
The administration OA sleeve replacement fixed the issue.
View ArticleHP c7000 blade enclosure fans
Hello,My customer has three blade enclosures in one rack in a temperature controlled data center. The bottom enclosure's fans are running twice as fast as the other two. 72%-85% for enclosure in...
View ArticleRe: HP c7000 blade enclosure fans
Hello,Update:Created case with HP. They recommended running an OA show all report and submitting to tech support. They would then be able to pinpoint server or compnent problem.
View ArticleRe: HP c7000 blade enclosure fans
Hello,Generate OA SHOWALL report from working enclosure and enclosure in question.Compare SHOW ENCLOSURE TEMP from both OA SHOWALL report. This will help you to identify which device causing the...
View ArticleRe: SB40c Firmware Upgrade
Hi all, sorry to hihjack this thread but I've got an SB40c-related issue and you're obviously using yours already (I hope your F/W upgrade went OK BTW).Rather than retype my issue (TL;DR - can't see...
View ArticleRe: BL460C G7 Controller / Disk load order with SB40C Storageblade
Hi Patric, sorry to hihjack this thread but I've got an SB40c-related issue and you're obviously using yours already.Rather than retype my issue (TL;DR - can't see the SB40c via the blade in order to...
View ArticleHP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update problem
The HP B-series 8/24c SAN Switch BladeSystem c-Class SAN switch run nicely with Brocade firmware V7.4.2d,but the update to firmware V7.4.2f fails:The system is coming up, please wait...U-Boot 1.1.3...
View ArticleRe: HP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update...
Finally I've found the "simple" solution:I had to upgrade from 7.4.2d not directly to v7.4.2f but doing an upgrade to v7.4.2e in between:v7.4.2d -> v7.4.2e -> v7.4.2f
View ArticleRe: HP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update...
Hello,Please let me know for further assistance if the issue still persists.If you feel this was helpful please click the KUDOS! thumb below! Regards,
View ArticleG8 server can't connect to internal HP Switch at C7000
Hi,I Install ESXi 6.5 om BL460 G8 server and can't reach internal HP Switch at C7000. I try to install ESi 5.5 and have the same issue.I upgrade Internal HP Switch and still can't reach From G8 server....
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
From the Onboard Admin (OA) main screen select the switch and check the Port Mapping... is there a link? (green)Check also the port mapping of the server.... link?What do you mean with "can't reach" ?...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
Hello,We need to first check Blade network/NIC status in the enclosure in the Onboard Administrator Console (OA).In OA Console under Port Mapping>> Please check status of NIC ports.What is the...
View ArticleG8 server can't connect to internal HPE Switch at C7000
Hi,I Install ESXi 6.5 om BL460 G8 server and can't reach internal HPE Switch at C7000. I try to install ESi 5.5 and have the same issue.I upgrade Internal HPE Switch and still can't reach From G8...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
From the Onboard Admin (OA) main screen select the switch and check the Port Mapping... is there a link? (green)Check also the port mapping of the server.... link?What do you mean with "can't reach" ?...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
Hello,We need to first check Blade network/NIC status in the enclosure in the Onboard Administrator Console (OA).In OA Console under Port Mapping>> Please check status of NIC ports.What is the...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
Hi,We found missing driver at ESXi ISO file. Thanks- its working now.
View Article(Consufused) Synergy 12000 with Virtual Connect SE 100Gb F32 Module
Hi All,I'm planning for a new Synergu 12000 system. with VC SE 100Gb F32 module.I want to have 2 VCs in 12000 chassis for Ethernet and FC storage connections: 4 x 10G Ethernet & 4 x 16G FC Storage...
View Article