Quantcast
Channel: All BladeSystem - General posts
Viewing all articles
Browse latest Browse all 1655

Re: C7000 blade system problem

$
0
0

Torsten - i have tried everything

I made a serial null modem cable - nothing from it - not signal on the hub

I have tried static adress's , dchp and nothing

I get activity from the led next to the interlink port and corisponding activity on the hub

 

The stupid thing must be dead

 

2 days !!! and this dam thing  will not appear - i have now tried reset on both OA modules - no good - i get the same activity from both modules to the hub........everything seems to be working except the dam thing appearing and giving its IP address

 

I am close to taking a hammer to this thing

 

I have never had any luck when i try to network anything 

 

I have tried crossover cable striaght to a laptop - nothing - Serial numm cable - nothing

 

When i stripped the entire machine to remove the insight lead i noticed that the enclouser is basically a big box - the only electronics in it  are the pcb for the LCD , that connects to the inner module. The 'guts' of the machine are the  OA modules and the sleeve they both plug into - they are the brain of the machine ( i think anyway) - 

 

I either have to buy a replacement lcd or new modules. I am thinking the modules are dead and the sleeve with them

 

really fed up with this dam thing and regreting buying it 

 


Viewing all articles
Browse latest Browse all 1655

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>