Re: OA, VC, ILO IP Address ip change
Hi,best practise is to have OA, VC as well as blade iLOs in the same subnet, however separated from production networks.You can change them anytime without impact to the blades or VC functions...1....
View ArticleFirmware
Hi i am using C7000 enclosures and HP blade servers. and i am running vsphere6. I want to upgrade the firmware of Enclosure BL servers. Please provide me any links or documents of upgrading the...
View ArticleAccessing Blade Server
Hi guysI have a c7000 chassis with gen 9 half height blades installed. OA is setup and each blade can be accessed by iLO.My question is what options do I have if my network connections to the OA...
View ArticleRe: Blade System Module
I need to connect the blade system to a firewall using RJ45 so I'm guessing the a HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem will do the job and then if I need any more RJ45...
View ArticleRe: C7000 blade system problem
Option 2)connect via serial cable, if needed, reset the password:a. With a null-modem cable (9600 N, 8, 1, VT100), locally connect to the Onboard Administrator.b. Press and hold the Reset button of the...
View ArticleRe: C7000 blade system problem
Hi Torsten. Thank you so much for the reply I have tried option as you have outlined above as I dont have null modem cable for option 2The c-7000 does not appear in the ipconfig/all display. There are...
View ArticleRe: C7000 blade system problem
yes, connect to the laptop port. did your pc received an ip address?by the way, you need to sort the interconnect modules later.
View ArticleRe: C7000 blade system problem
No I have had no LuckI have other proliant servers for rendering and when i connect them they appear in my networkI got this machine yesterday. When I collected it it was completely taken apart. I put...
View ArticleRe: C7000 blade system problem
The service port is using a 169.254.1.x network with mask 255.255.255.0.Normally your PC get an DHCP address from there.Otherwise you set your PC to 169.254.1.254 and search the network for other...
View ArticleRe: C7000 blade system problem
Hi TorstenStill no luck with this. I have my win 7 machine, going to a router/hub. I have another hp proliant plugged into the router/ hubRunning 'advanced ip sanner' it lists my machine, the hp...
View ArticleRe: C7000 blade system problem
Try to get a serial cable (null modem) and connect it to the active OA (blue LED is on).
View ArticleRe: C7000 blade system problem
>> Running 'advanced ip sanner' it lists my machine, the hp proliant and the hub no problem. Did you gave the Win7 PC and the Proliant a 169.254.1.x address with mask of 255.255.255.0? For...
View ArticleRe: C7000 blade system problem
Torsten - i have tried everythingI made a serial null modem cable - nothing from it - not signal on the hubI have tried static adress's , dchp and nothingI get activity from the led next to the...
View ArticleRe: C7000 blade system problem
Torsten - I give up on thisThe module is not sending its ip no matter what i doHave decided to buy a replacement LCD - at least I will know what is going on with the machine as there is no video output...
View ArticleRe: C7000 blade system problem
whoooooo - i was just about to turn it all off and i tried one more time I got something from the module itself - 192.168.1.2 - integrated lights out 2 is on the laptoptrying to login
View ArticleRe: C7000 blade system problem
now for no reason both OA modules appear if i connect to them - I have no idea what i didBut i cannot log into either of them with the username and password printed on the underside of each modulestill...
View ArticleClik here to view.
Re: C7000 blade system problem
>> I got something from the module itself - 192.168.1.2 - integrated lights out 2 is on the laptop This is the ILO of one of the servers.Looks like you still have an IP address problem.If you...
View ArticleRe: Backup from C7000
Hi, suppose I going to setup a data center and there I need to install lots of chassis and much configuration is similar in all chassis. so is there possible that I could take a backup copy from a...
View ArticleRe: C7000 blade system problem
Hi TorstenThank you for all your help.Here are 2 images - the first is with the adapter set to DCHPThe second is with a static IPI removed and stripped the sleeve module for the OA's last night. There...
View Article