Re: OA failed during f/w update, trying to restore f/w
TFTP server is on the same subnet as the OA when it grabs the DHCP IP address
View ArticleRe: OA failed during f/w update, trying to restore f/w
A local firewall on the system where TFTP server is running?
View ArticleRe: OA failed during f/w update, trying to restore f/w
I have done this successfully several times. HP Onboard Administrator booting...Lost Password or Flash Recovery requestedPress L for Lost Password RecoveryPress F for Flash RecoveryPress any other key...
View ArticleRe: OA failed during f/w update, trying to restore f/w
Actually you were right in a sense, thanks! 2 things I had an IP subnet restriction on my TFTP server that was blocking that subnet. Turned it off & the transfer worked.Still failed the f/w...
View ArticleCustom SPP Bungle - Gen8
HelloWe are preparing a FW upgrade on Blade 460 Gen 8 and 9.We created a Custom SPP using HP Sum (8.3.5) with the latest SPP 2018.9.0.I added RPM packages for Gen8 and 9 (Bios ilo).When I run the...
View ArticleRe: Custom SPP Bungle - Gen8
Hi ,Please log a support case with HPE. A detailed Log analysis is required. I work for HPE
View ArticleRe-purposing an old BL460c G6 - system hangs on any reboot
I managed to get my hands on and old unit with dual Xeon X5670 and 92GB Ram that was retired back in 2016 and stored in a warehouse. After checking out the price of a second-hand enclosure, I decided...
View ArticleRe: Re-purposing an old BL460c G6 - system hangs on any reboot
How about cooling? You have no fans.
View ArticleRe: Re-purposing an old BL460c G6 - system hangs on any reboot
I made a custom alu case and mounted three of these at the back, pull mode. The CPU Block Temp is under 35°C, using a temperature probe just to be sure....
View ArticleRe: Re-purposing an old BL460c G6 - system hangs on any reboot
I haven't looked in awhile, but just saw a C3000 enclosure with power supplies for ~200.00 , a Cisco switch module for ~16.00 and an OA module for ~23 on ebay. might be easier than trying to wing it
View ArticleRe: Re-purposing an old BL460c G6 - system hangs on any reboot
The C3000 enclosure seems to be around 700$. I can get a C7000 for 350$, but it just like a massive overkill and a waste of space. Anyway, it turned out to be an hardware issue. I had an identical...
View ArticleClik here to view.
508955-001 vs 624787-001 cooler, which one is better?
I have two coolers lying around, the 508955-001 and 624787-001 version. The 508955-001 is heavier and wider at the bottom with wider fins and visible copper heat pipes. The 624787-001 is basically a...
View ArticleConverting c7000 from 3 phase to single phase power
I have a need to convert 2 c7000 chassis from three phase input power to singe phase. My reseach tells me that this can be done simply by swapping the power module and then enter command 'Set...
View ArticleRe: 508955-001 vs 624787-001 cooler, which one is better?
Hi,The mentioned spare (508955-001) is used in BL460 G6/G7 server and Spare (624787-001) is used in BL 460 G7 only. The heat pipe material cannot be revelealed as it is company confidential. I work for...
View ArticleIssues with new 4gb fiber switch module
Purchased a new Cisco fiber switch module, when I was insert it into a c7000 enclosure the blade gets initialized but then goes to all amber lights for the port status lights. When I insert a spf, I...
View ArticleRe: Issues with new 4gb fiber switch module
What is the model of the switch? Has the setup utility been run?What model blades are to connect through this switch?What is the HBA model installed in these blades?What steps were taken to assign...
View ArticleRe: Converting c7000 from 3 phase to single phase power
HI ,yes, it is compitable to all Geneations of C7000 enclosures, if your not using blue cables with iPdu intelligent features.regardsJaveed
View ArticleHPE C7000 - Packet Loss to Bay iLO Addresses
Hi there,I have a pair of C7000 enclosures with redundant OAs in both and the enclosure interconnect cable in place.What I'm seeing is packet loss to the bay iLO addresses, which makes installing OSes...
View ArticleRe: C7000 stacking and updating in production
There are two types of stacking , VC stacking or OA stacking. OA stacking:If you are reffereing about OA stacking, you will not need any downtime. Make suer OA credientials needs to be same in all...
View ArticleConnecting to Blade9.... KVM Console
I am trauying to connecting balde vai KVM console is hang with error, not getting display and OA screen not working.The Error is Connecting to Blade9...chassis: C7000Blade: bl460cKVM COnsle Please help...
View Article