Re: HP c7000 blade enclosure fans
Hello,Update:Created case with HP. They recommended running an OA show all report and submitting to tech support. They would then be able to pinpoint server or compnent problem.
View ArticleRe: HP c7000 blade enclosure fans
Hello,Generate OA SHOWALL report from working enclosure and enclosure in question.Compare SHOW ENCLOSURE TEMP from both OA SHOWALL report. This will help you to identify which device causing the...
View ArticleRe: SB40c Firmware Upgrade
Hi all, sorry to hihjack this thread but I've got an SB40c-related issue and you're obviously using yours already (I hope your F/W upgrade went OK BTW).Rather than retype my issue (TL;DR - can't see...
View ArticleRe: BL460C G7 Controller / Disk load order with SB40C Storageblade
Hi Patric, sorry to hihjack this thread but I've got an SB40c-related issue and you're obviously using yours already.Rather than retype my issue (TL;DR - can't see the SB40c via the blade in order to...
View ArticleHP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update problem
The HP B-series 8/24c SAN Switch BladeSystem c-Class SAN switch run nicely with Brocade firmware V7.4.2d,but the update to firmware V7.4.2f fails:The system is coming up, please wait...U-Boot 1.1.3...
View ArticleRe: HP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update...
Finally I've found the "simple" solution:I had to upgrade from 7.4.2d not directly to v7.4.2f but doing an upgrade to v7.4.2e in between:v7.4.2d -> v7.4.2e -> v7.4.2f
View ArticleRe: HP B-series 8/24c SAN Switch BladeSystem c-Class V7.4.2f firmware update...
Hello,Please let me know for further assistance if the issue still persists.If you feel this was helpful please click the KUDOS! thumb below! Regards,
View ArticleG8 server can't connect to internal HPE Switch at C7000
Hi,I Install ESXi 6.5 om BL460 G8 server and can't reach internal HPE Switch at C7000. I try to install ESi 5.5 and have the same issue.I upgrade Internal HPE Switch and still can't reach From G8...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
From the Onboard Admin (OA) main screen select the switch and check the Port Mapping... is there a link? (green)Check also the port mapping of the server.... link?What do you mean with "can't reach" ?...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
Hello,We need to first check Blade network/NIC status in the enclosure in the Onboard Administrator Console (OA).In OA Console under Port Mapping>> Please check status of NIC ports.What is the...
View ArticleRe: G8 server can't connect to internal HP Switch at C7000
Hi,We found missing driver at ESXi ISO file. Thanks- its working now.
View ArticleRe: Communication with Active Onboard Administrator Lost
Running into the same issue with both SUM and VCSU failing and having the SFTP error stated in the post above me.
View ArticleClik here to view.
Blade reported an abnormally low power requirement
We have the ProLiant BL465c Gen8, BladeSystem c3000 Enclosure. Firmware 2.10.We have 4 Bays, which on Bay 2 is located our Backup server. Last month the fans of our server started running at almost...
View ArticleBlade HP C7000 - Server Blade Enclosure Power Request Denied
The company where I work bought a blade server HP C7000 and are unable to connect the bays is showing error Power Request Denied, I must be forgetting to do something, if anyone can help me.The link...
View ArticleRe: Blade HP C7000 - Server Blade Enclosure Power Request Denied
Hello,I have checked the uploaded snaps, you installed 4 GB FC module into IO bay 1 and bay 2. Those two bays are designed for ethernet connectivity. Please remove those two module and installed in IO...
View ArticleRe: Blade reported an abnormally low power requirement
Hello,I hope all is well.I would suggest updating the Onboard Administrator firmware with the latest ( if Onboard Administrator is running 2.10 firmware) and follow the below link.HPE ProLiant Server...
View ArticleRe: Blade HP C7000 - Server Blade Enclosure Power Request Denied
I changed the position, but it appears the same error, is to two sources only, but it is only a test.https://imgur.com/a/DhSyl4t
View ArticleClik here to view.
Re: Blade reported an abnormally low power requirement
Oh thanks for replying.In that case is there any problem if I update the Firmware from 2.10 directly to the latest? Or I gotta update it gradually?EDIT.: I just found out some info that I might have...
View ArticleRe: Blade HP C7000 - Server Blade Enclosure Power Request Denied
Hello,I see that, you have two power supply. Please install in bay 1 and 4. Remove FC module from Bay 3 and 4. Now power on the server and check. If that does not resolve the issue we need to look at...
View Article